Instructions Development Review
Begin by calling 407-742-0210.
From the Main Menu
- Press 1 - Schedule an Inspection
- Press 2 - Cancel an Inspection
- Press 3 - Obtain Inspection Results
- Press 4 - Plan Review
- Press 5 - Certificate of Occupancy
- Press 0 - Speak to an Operator
- Press * - General Information
- Press # - End the Call
First, Press 1 to Schedule an Inspection
Then, Press 2 to select Engineering Permits
Next, Select the correct Permit Type based on the letter(s) that your permit begins with.
- DW - Driveway, Press 1
- U - Utility, Press 2
- CEP - Commercial, Press 3
- ESP - Subdivision, Press 4
Enter all 8 digits of your permit number, including any leading zeros. Be sure to press the # key after entering the permit number.
IVRS will confirm this permit by speaking back the site address. Please note that some Engineering Permits or Project Types may not have a site address attached (example: U, CEP, ESP).
Enter the 4 digit code for the type of inspection you are scheduling, including all leading zeros.
Example: Pressing 0001 would schedule a Sizing / Driveway type insepction.
Note: You may only schedule inspections associated with your permit type.
After you have scheduled the inspection you will be able to:
- Leave an important message for the inspector
- Get a confirmation number for this inspection request
- Request another inspection
- Get notification of inspection results
- Return to the Main Menu